Haus DIY3D Printer Accessories3D Printer Nozzle
Harfington 3D Printer Nozzle Replacement for MK10 1.75mm Extruder Print

3D Printer Nozzle Replacement for MK10 1.75mm Extruder Print

ID:
€6,35 Normaler Preis
/
Brass Tone
Color
M6x0.3mm
Size
Über diesen Artikel
  • [Size]: Thread: M6; Nozzle Diameter: 0.3mm; Input Diameter: 2mm; Total Dimension: 13x8mm / 0.51"x0.31" (L*D)
  • [Compatibility]: Compatible with 1.75mm Filament MK8 3D printers.
  • [Brass Material]: Not easy to get rust or erosion, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • [Size]: Thread: M6; Nozzle Diameter: 0.3mm; Input Diameter: 2mm; Total Dimension: 13x8mm / 0.51"x0.31" (L*D)
  • [Compatibility]: Compatible with 1.75mm Filament MK8 3D printers.
  • [Brass Material]: Not easy to get rust or erosion, provides long service life.
  • [Smooth Surface]: Smooth contact surface can be well connected with other head of hot end to avoid exudation, get a smooth and clean printing.
  • [Application]: Suitable for most non-abrasive materials such as PLA, ABS, Nylon, TPE, TPU, PC etc.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:

Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.

 

Specification:

Material: Brass

Screw Thread: M6

Nozzle Diameter: 0.3mm

Input Diameter: 2mm

Total Dimension: 13x8mm / 0.51x0.31 inch (L*D)

 

Package Content:

4 x Brass Nozzle

 

NOTE: 

Small accessories, please keep away from children.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

 

How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€6,35 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.

 

Specification:

Material: Brass

Screw Thread: M6

Nozzle Diameter: 0.3mm

Input Diameter: 2mm

Total Dimension: 13x8mm / 0.51x0.31 inch (L*D)

 

Package Content:

4 x Brass Nozzle

 

NOTE: 

Small accessories, please keep away from children.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

 

How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .