Haus HardwareMachine Tool AccessoriesCollet & BladeDrill Bits
Harfington 17mm Drill Bit HSS 9341 Black Oxide with 1/2 Inch Straight Reduced Shank

17mm Drill Bit HSS 9341 Black Oxide with 1/2 Inch Straight Reduced Shank

ID:
€12,08 Normaler Preis
/
Über diesen Artikel
  • High Speed Steel tool - 17mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • High Speed Steel tool - 17mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
Specification:
Cutting Diameter: 17mm / 0.67"
Shank Diameter: 1/2" / 12.7mm (approx.)
Cutting Edge Length: 78mm / 3.07"
Overall Length: 150mm / 6.0"
Material : High Speed Steel 9341 (HSS 9341)
Finish Type: Black Oxide, Nitriding
Shank Type: Round Shank
Tool Flute Type: Spiral
Hardened to: 62-65 HRC

Descriptions:
1. High-speed steel tool is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
2. Reduced shank drill expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
3. Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
4. Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
5.  Running in a counterclockwise direction (right-hand cut), spiral fluted tool evacuates chips up and out of the cut to reduce clogging.

Package:
1 x Reduced Shank Drill Bit

Use Note:
1. To make clean and precise holes, water is required for lubrication and cooling when drilling metals.
2. Low drill pressure and increased use of water lubrication will extend drill bit life.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€12,08 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Specification:
Cutting Diameter: 17mm / 0.67"
Shank Diameter: 1/2" / 12.7mm (approx.)
Cutting Edge Length: 78mm / 3.07"
Overall Length: 150mm / 6.0"
Material : High Speed Steel 9341 (HSS 9341)
Finish Type: Black Oxide, Nitriding
Shank Type: Round Shank
Tool Flute Type: Spiral
Hardened to: 62-65 HRC

Descriptions:
1. High-speed steel tool is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
2. Reduced shank drill expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
3. Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
4. Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
5.  Running in a counterclockwise direction (right-hand cut), spiral fluted tool evacuates chips up and out of the cut to reduce clogging.

Package:
1 x Reduced Shank Drill Bit

Use Note:
1. To make clean and precise holes, water is required for lubrication and cooling when drilling metals.
2. Low drill pressure and increased use of water lubrication will extend drill bit life.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)