Haus Power TransmissionRotary MotionBearingsRoller BearingsNeedle-Roller Bearings
/

Needle Roller Bearings, Chrome Steel Needles One Way Clutch Bearing

ID:
€8,01 Normaler Preis
/
16x22x26mm
Size
2pcs
Package Content
Über diesen Artikel
  • Size: (I.D. (Fw)= 16mm, O.D. (D)= 22mm, Width (C)= 26mm)
  • ST14 steel drawn cup, GCr15 needle rollers one way clutch
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • Size: (I.D. (Fw)= 16mm, O.D. (D)= 22mm, Width (C)= 26mm)
  • ST14 steel drawn cup, GCr15 needle rollers one way clutch
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:

Specification:

Drawn Cup Material: ST14 Steel

Needle Roller Material: Chromium Steel (GCr15)

Bore Diameter (Fw): 16mm

Outside Diameter (D): 22mm

Width: 26mm

Torque: 20.5N*m

Rotating Shaft Limiting Speed: 8500rpm

Rotating Outer Ring Limiting Speed: 7500rpm

Number of Pack: 1 Pcs

Description:

-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.

-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.

-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.

-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

-NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€8,01 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Specification:

Drawn Cup Material: ST14 Steel

Needle Roller Material: Chromium Steel (GCr15)

Bore Diameter (Fw): 16mm

Outside Diameter (D): 22mm

Width: 26mm

Torque: 20.5N*m

Rotating Shaft Limiting Speed: 8500rpm

Rotating Outer Ring Limiting Speed: 7500rpm

Number of Pack: 1 Pcs

Description:

-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.

-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.

-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.

-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

-NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)