Haus Electrical & LightingElectricalResistorsAluminum Case Resistors
/

Uxcell Aluminum Case Resistor 100W 200 Ohm Wirewound Green for LED Replacement Converter 100W 200RJ

ID:
€6,87 Normaler Preis
/
Über diesen Artikel
  • 100 Wattage and 200 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
  • Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
  • This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
  • Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
  • Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • 100 Wattage and 200 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
  • Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
  • This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
  • Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
  • Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:
100 Wattage and 200 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.

Specification:
Main Body Length: 59 mm/ 2.32 inches
Power: 100 Wattage
Rated Resistance: 200 R
Tolerances: 5%(J)
Connection Type: Rod terminals with hole
Rod Length: 12mm/0.47 inches
Screw Hole: 3.2mm(Fit #2 or M2.3 nuts)
Distance between screw hole: 45mm
Weight: 30g/1.05 Oz
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Green

Package Content:
1 x 100W 200R Aluminum Housed Resistor
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€6,87 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

100 Wattage and 200 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.

Specification:
Main Body Length: 59 mm/ 2.32 inches
Power: 100 Wattage
Rated Resistance: 200 R
Tolerances: 5%(J)
Connection Type: Rod terminals with hole
Rod Length: 12mm/0.47 inches
Screw Hole: 3.2mm(Fit #2 or M2.3 nuts)
Distance between screw hole: 45mm
Weight: 30g/1.05 Oz
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Green

Package Content:
1 x 100W 200R Aluminum Housed Resistor
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)