Haus Electrical & LightingElectricalResistorsAluminum Case Resistors
/

25 Watt 1 Ohm 5% Aluminum Housing Resistor Wirewound Resistor Gold Tone 5Pcs

ID:
€11,33 Normaler Preis
/
Über diesen Artikel
  • 25 Watt and 1 Ohm, 5% tolerance. Size: 28mm x 27mm x 14mm, total lenght with connector: 50mm.
  • Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
  • This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built. Wire Wound Resistor owns high reliability and accuracy. Moreover, it was used for various application because of the wide resistance range.
  • Chassis mounted with Screws, Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
  • Reliable. Problems like the flush LED and ring doorbell would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • 25 Watt and 1 Ohm, 5% tolerance. Size: 28mm x 27mm x 14mm, total lenght with connector: 50mm.
  • Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
  • This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built. Wire Wound Resistor owns high reliability and accuracy. Moreover, it was used for various application because of the wide resistance range.
  • Chassis mounted with Screws, Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
  • Reliable. Problems like the flush LED and ring doorbell would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:

25 Watt 1 Ohm Aluminum Case Wirewound Resistor with 5% Tolerance

Power: 25W

Resistance: 1 ohm

Tolerance: 5%

Connection Type: Rods

Board Length: 28mm

Mounting Hole Diameter: 3.5mm

Distance Between Mounting Hole: 18mm

Materials: Nickel alloys Wire Wound Resistor with Aluminum Case

Color: Gold

Package Content: 5 pcs 25W 1ohm Aluminum Resistor

Suggestion:

a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.

b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

  • If you choose a 30% increase in rated power, you must add a heat sink device.
  • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€11,33 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

25 Watt 1 Ohm Aluminum Case Wirewound Resistor with 5% Tolerance

Power: 25W

Resistance: 1 ohm

Tolerance: 5%

Connection Type: Rods

Board Length: 28mm

Mounting Hole Diameter: 3.5mm

Distance Between Mounting Hole: 18mm

Materials: Nickel alloys Wire Wound Resistor with Aluminum Case

Color: Gold

Package Content: 5 pcs 25W 1ohm Aluminum Resistor

Suggestion:

a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.

b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

  • If you choose a 30% increase in rated power, you must add a heat sink device.
  • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)