Haus Power TransmissionRotary MotionBearingsBall BearingsDeep Groove Ball Wheel Bearings
Harfington MR84ZK Ball Bearings Z2 4x8x2mm Single Shielded Chrome Steel 5pcs

MR84ZK Ball Bearings Z2 4x8x2mm Single Shielded Chrome Steel 5pcs

ID:
€8,26 Normaler Preis
/
Über diesen Artikel
  • MR84ZK (I.D.=4mm, O.D.=8mm, Thickness=2mm)
  • mr84zk bearings are shielded on SINGLE SIDE to keep lubricant in
  • Made from Chrome Steel (GCr15), features with good anti-rust and corrosion resistance
  • ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
  • Static load rating of 113 newtons and dynamic load rating of 336 newtons
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • MR84ZK (I.D.=4mm, O.D.=8mm, Thickness=2mm)
  • mr84zk bearings are shielded on SINGLE SIDE to keep lubricant in
  • Made from Chrome Steel (GCr15), features with good anti-rust and corrosion resistance
  • ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
  • Static load rating of 113 newtons and dynamic load rating of 336 newtons
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

 

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • These cost-effective bearings are widely used in areas with low requirements.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

Selecting Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

Specification:

Model: MR84ZK

Seal Type: Single Shielded

Inner Race/Outer Race Material: Chrome Steel (GCr15)

Cage Material: Stamping Steel

Inner Diameter (d): 4mm

Outer Diameter (D): 8mm

Thickness (B): 2mm

Dynamic Load Rating (Cr): 336N

Static Load Rating (Cor): 113N

Accuracy Class: P0 (ABEC-1)

Noise Level: Z2

Number of Pack: 5 Pcs

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€8,26 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

 

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • These cost-effective bearings are widely used in areas with low requirements.
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

Selecting Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

Specification:

Model: MR84ZK

Seal Type: Single Shielded

Inner Race/Outer Race Material: Chrome Steel (GCr15)

Cage Material: Stamping Steel

Inner Diameter (d): 4mm

Outer Diameter (D): 8mm

Thickness (B): 2mm

Dynamic Load Rating (Cr): 336N

Static Load Rating (Cor): 113N

Accuracy Class: P0 (ABEC-1)

Noise Level: Z2

Number of Pack: 5 Pcs

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)