Haus Power TransmissionRotary MotionBearingsRoller BearingsNeedle-Roller Bearings
/

Needle Roller Bearings, Open End, Stamping Steel Drawn Cup, Inches

ID:
€7,13 Normaler Preis
/
7/8x1-1/8x3/4"
Size
2pcs
Package Content
Über diesen Artikel
  • Model: SCE1412 (I.D. (Fw)= 7/8", O.D. (D)= 1-1/8", Width (C)= 3/4")
  • ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Rollers
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • Model: SCE1412 (I.D. (Fw)= 7/8", O.D. (D)= 1-1/8", Width (C)= 3/4")
  • ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Rollers
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:

Specification:

Model: SCE1412

Drawn Cup Material: ST14 Steel

Cage Material: ST13 Steel

Needle Roller Material: Chromium Steel (GCr15)

Accuracy: P0

Bore Diameter (Fw): 7/8" / 22.225mm

Outside Diameter (D): 1-1/8" / 28.575mm

Width: 3/4" / 19.05mm

Dynamic Load Rating: 16900N

Static Load Rating: 27000N

Number of Pack: 2 Pcs

Description:

-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.

-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.

-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.

-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€7,13 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Specification:

Model: SCE1412

Drawn Cup Material: ST14 Steel

Cage Material: ST13 Steel

Needle Roller Material: Chromium Steel (GCr15)

Accuracy: P0

Bore Diameter (Fw): 7/8" / 22.225mm

Outside Diameter (D): 1-1/8" / 28.575mm

Width: 3/4" / 19.05mm

Dynamic Load Rating: 16900N

Static Load Rating: 27000N

Number of Pack: 2 Pcs

Description:

-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.

-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.

-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.

-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)