Haus Power TransmissionRotary MotionBearingsBall BearingsDeep Groove Ball Wheel Bearings
Harfington Uxcell V623Deep Groove Guide Pulley Rail Ball Bearings 3mmx10mmx3mm Open Type Carbon Steel Bearings 20pcs

Uxcell V623Deep Groove Guide Pulley Rail Ball Bearings 3mmx10mmx3mm Open Type Carbon Steel Bearings 20pcs

ID:
€8,41 Normaler Preis
/
Über diesen Artikel
  • V623 (I.D.=3mm, O.D.=10mm, Thickness=3mm)
  • V623 bearings are shielded on both sides to keep lubricant in
  • Carbon Steel long-life bearings, smooth and low noise
  • ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
  • Dynamic load rating of 536 newtons and Static load rating of 175 newtons
  • Auf Lager
Einkaufswagen
Warenkorb
Über diesen Artikel
  • V623 (I.D.=3mm, O.D.=10mm, Thickness=3mm)
  • V623 bearings are shielded on both sides to keep lubricant in
  • Carbon Steel long-life bearings, smooth and low noise
  • ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
  • Dynamic load rating of 536 newtons and Static load rating of 175 newtons
Spezifikation

Spezifikation

Anfrage erfolgreich abgeschickt
Wir werden Ihnen innerhalb von 24 Stunden während der Arbeitszeit antworten. Sollten Sie bis dahin noch keine Antwort erhalten haben, überprüfen Sie bitte Ihren Spam. Wir danken Ihnen!
Zahlungen werden über die Website oder den Stripe-Zahlungslink verarbeitet. Bitte beachten Sie, dass E-Mails von Domainkontakten, die nicht @harfington.com sind, nicht vertraut werden sollten.
Artikel Beschreibung:

Note:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

  

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • Carbon Steel made with heat treating, provides high and uniform hardness, good wear resistance
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

Specification:

Model: V623

Type: Open Type

Inner Race/Outer Race Material: Carbon Steel

Cage Material: Stamping Steel

Inner Diameter (d): 3mm

Outer Diameter (D): 10mm

Thickness (B): 4mm

Groove width: 1.63mm 

Groove depth: 0.5mm

V groove: 90 degree

Dynamic Load Rating (Cr): 536 N

Static Load Rating (Cor): 175 N

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 20Pcs

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
€8,41 Normaler Preis
/
  • Auf Lager
Einkaufswagen
Warenkorb
Kostenloser Versand über $20

Produktvarianten

Produkte Titel ID Preis Menge
Produkte Titel ID Preis Menge
Menge: {[total.qty]} Artikel(s)
Gesamtbetrag: {[handleCurrency(total.price*100)]}
Mehr sehen

Beschreibung

Beschreibung

Note:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

  

Description:

  • Single-row, pre-lubricated, normal accuracy.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
  • With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
  • Carbon Steel made with heat treating, provides high and uniform hardness, good wear resistance
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

 

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

 

Specification:

Model: V623

Type: Open Type

Inner Race/Outer Race Material: Carbon Steel

Cage Material: Stamping Steel

Inner Diameter (d): 3mm

Outer Diameter (D): 10mm

Thickness (B): 4mm

Groove width: 1.63mm 

Groove depth: 0.5mm

V groove: 90 degree

Dynamic Load Rating (Cr): 536 N

Static Load Rating (Cor): 175 N

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 20Pcs

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Kostenloser Versand in die US über $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || 'US$20')]}
{['Geschätzte Versandzeit wird innerhalb von 6-14 Tagen sein'.replace('6-14', currentShipping.days || '6-15')]}
Versandart

Schiff nach

Gesamtlieferzeit = Bearbeitungszeit + Versandzeit
Großhandelsanfrage
* Produktname
* Menge (pro Stück)
* Email-Adresse
Kundenname
Voraussichtliche Ankunftszeit
Kundenhinweis
0/990
Wenn Sie die Großbestellung konsultieren möchten, können Sie eine Anfrage einreichen oder uns kontaktieren .

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)