Home HardwareDoor & Cabinet HardwareBracketsGlass Shelf Supports
Harfington Uxcell Spring Collet Chuck for CNC Engraving Machine Milling Tool

Uxcell Spring Collet Chuck for CNC Engraving Machine Milling Tool

ID:
AU$11.20 Regular price
AU/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
ER20-5mm
Style
About this item
  • Model - ER-20 Spring Collet, 5mm Clamping Diameter.
  • Material - 40Cr Steel, general hardness and wear resistance
  • Precision - 0.015mm / 0.0006-inch
  • Applications - Suitable for manual vertical or horizontal milling machines, drilling machines and other equipment.
  • Package Content - 1 x Spring Collet Chuck
  • In stock, ready to ship
Cart
Cart
About this item
  • Model - ER-20 Spring Collet, 5mm Clamping Diameter.
  • Material - 40Cr Steel, general hardness and wear resistance
  • Precision - 0.015mm / 0.0006-inch
  • Applications - Suitable for manual vertical or horizontal milling machines, drilling machines and other equipment.
  • Package Content - 1 x Spring Collet Chuck
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Payments will be processed via the website or Stripe payment link. Please note that domain contact emails other than @harfington.com should not be trusted.
Product Description:

Description:

  1. This ER collet is used for CNC milling lathe tools and work holding engraving machines.

  2. Collet must be placed into collet chuck nut before inserting into collet chuck.

Install and Disassembly Instruction:

  1. Put the collet into the nut, turn it slightly, and wait until the eccentric part of the nut is recessed into the circlip groove, push the collet evenly to fit it into the nut.

  2. Install the collet and nut on the chuck body or the spindle of the machine tool together, put the engraving tool into the clamping hole, use a wrench to tighten the nut until the engraving tool is firmly clamped.

  3. When replacing the engraving tool, use a wrench to loosen the nut to bring out the chuck and engraving tool, remove the engraving tool, push the collet to make it exit, and then replace the collet with other size as needed.

     

    Specifications:

    Model: ER20

    Clamping Diameter: 5mm

    Material: 40Cr Steel

    Precision: 0.015mm / 0.0006-inch

    Total Height: 31.5mm / 1.24-inch

    Outer Diameter(Max): 21mm / 0.83-inch

     

    Package Includes: 

    1 x Spring Collet

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
AU$11.20 Regular price
AU/
Wholesale Price
20%OFF
Order $5000+
  • 20%OFF
    Order $5000+
  • 15%OFF
    Order $2000+
  • 10%OFF
    Order $800+
  • 7%OFF
    Order $500+
  • 5%OFF
    Order $200+
  • In stock, ready to ship
Cart
Cart
Free Shipping over $20 Free upgraded to DHL over AU$300
By default, UPS or DHL or equivalent express delivery options will be selected, with an estimated delivery time of 4-7 days. Except for remote areas or extremely large volume products.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Description:

  1. This ER collet is used for CNC milling lathe tools and work holding engraving machines.

  2. Collet must be placed into collet chuck nut before inserting into collet chuck.

Install and Disassembly Instruction:

  1. Put the collet into the nut, turn it slightly, and wait until the eccentric part of the nut is recessed into the circlip groove, push the collet evenly to fit it into the nut.

  2. Install the collet and nut on the chuck body or the spindle of the machine tool together, put the engraving tool into the clamping hole, use a wrench to tighten the nut until the engraving tool is firmly clamped.

  3. When replacing the engraving tool, use a wrench to loosen the nut to bring out the chuck and engraving tool, remove the engraving tool, push the collet to make it exit, and then replace the collet with other size as needed.

     

    Specifications:

    Model: ER20

    Clamping Diameter: 5mm

    Material: 40Cr Steel

    Precision: 0.015mm / 0.0006-inch

    Total Height: 31.5mm / 1.24-inch

    Outer Diameter(Max): 21mm / 0.83-inch

     

    Package Includes: 

    1 x Spring Collet

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AU').replace('$20', currentShipping.price || 'US$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to DHL over AU$300

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .